eSwimmingpool.info

I have a hotspring sovereign 2004 hot tub and have to change the main power wiring from the house to the tub as my dog bit in to it. It is 120v circuit. My question is how do i release the wires going to the control box from there slot on the circuit board. Usually [...]

I first turned off the power to the hot tub.Then I drained the hot tub and put new water in it now it wont heat up any at all. How can I fix this?

There are two breaker boxes and the meter panel. The outside breaker has 3 breakers for the A/C and one 100amp(labeled “main”) that must go to the inside sub breaker. When I flip that “main” outside breaker the A/C continues to operate.
The combined Ampage of all those outside breakers is 180. How [...]

I have an out door hot tub. Sometimes there are power failures in the winter. The tub is insulated but the lines to the motor, which are about two inches in diameter are not. There are 425 gallons of water in the tub. What does the water/bromine(chlorine) ratio (i.e. ppm for [...]

If you keep the water circulating constantly ( including flow through chlorinators etc) there’s no problem. Moving water doesn’t freeze. The issue you’ll have, is that if your area suffers some sort of power outage during the winter, you’ll get a freeze. There’s your risk.
I see that people are suggesting all sorts of things [...]

I just got a used hot tub and I need to know how to hook up the 240 power it requires. I know a little about elecitricty,like changing outlets and switches, but nothing of this magnitude. I need to know how to run it from my breaker box to the hot tub. [...]